TC-1640 Gear-Head Lathe

Feature

All castings are properly stabilized and stress relieved.
Bed ways are hardened & ground to min. HRC 48 - 55.
Turcite B coating between the bed and carriage.
Extremely low noise level.
Foot brake pedal provided.
Built-in coolant pump & fitting provided.
Wider bed way which gives absorbs vibration.

Specifications

MODEL			TC-1640

CAPACITY
Height of centers			205 mm (8.07")
Swing over bed			Ø410 mm (16.14")
Swing in gap			Ø620 mm (24.4")
Swing over cross slide			Ø255 mm (10.04")
Distance between centers			1000 mm (40")
Width of bed			305 mm (12")
Gap width in front faceplate			120 mm (4.72")
HEADSTOCK AND MAIN SPINDLE

Spindle nose, internal taper			120 mm (4.72")
Spindle center sleeve			Ø70 mm (2.76") Taper 1/19.18 MT x NO.4
Spindle bore			Ø65 mm (2.55")
Spindle speed: Gear steps / Range			12 steps / 36 ~ 1800 RPM
Spindle speed: 36			130
Spindle speed: 620
CARRIAGE

Cross slide travel			250 mm (9.84")
Top slide travel			155 mm (6.1")
THREADS AND FEEDS

Whitworth threads: Kinds / Range			45 kinds / 2 ~ 72 T.P.I.
Metric threads: Kinds / Range			39 kinds / 0.2 ~ 14 mm
D.P. threads: Kinds / Range			21 kinds / 8 ~ 44 D.P.
M.P. threads: Kinds / Range			18 kinds / 0.3 ~ 3.5 M.P.
Longitudinal feeds			0.04 ~ 1.0 mm (0.0015" ~ 0.04")
Cross feeds			0.02 ~ 0.5 mm (0.00075"~ 0.02")
TAILSTOCK

Quill diameter			Ø59 mm (2.322")
Quill travel			127 mm (5")
Taper of center			MT No. 4
MOTOR

Main spindle			5 HP (3.75 kW)
Coolant pump			1/8 HP (0.09375 kW)
MEASUREMENT

APPROXIMATE Weight			NET 1600 kgs
Gross Weight			GROSS 1800 kgs
Length			2400 mm
Width x Height			Width 1120 (44.1") x Height 1900 mm (74.8")