1. 75 degree slant bed design not only benefits keeping the advantages of accessibility and excellent chip disposal, but also lowers the machine’s gravity center for enhancing the entire structure rigidity.
2. The TMS series is able to be applied for multi-process machining; integrating swing B-axis and 5-axis simultaneous motion controller is able to be applied for complex curve surface contouring.
3. The parts are possible to be finished just in one machine setup.
4. Due to the chain type magazine design, it allows workpiece changing and tool changing to process simultaneously for shortening the machining time.
| Specification | |
| Item | TMT2000-T2Y1 |
| Chuck O.D. | 8" inch |
| Bar capacity | Ø65 (Ø51) mm |
| X1/X2/X3 axis travel | 230/205/- mm |
| Y1/Y2/Y3 axis travel | ±51/-/- mm |
| Z1/Z2/Z3/B axis travel | 600/600/-/680 mm |
| X/Y/Z/B axis rapid traverse | 30/15/36/30 m/min |
| Spindle nose | A2-6 |
| Spindle speed | 4,500 (6,000) rpm |
| Spindle motor | 18.5/15/11 kW |
| Sub-spindle chuck O.D. | 8" mm |
| Sub-spindle speed | 6,000 rpm |
| Sub-spindle motor | 18.5/11 kW |
| Tool capacity | 12 (16) x2 pc |
We Welcome all inquire regarding Sales, Service and Spare part.
Our representative will get back to you as soon as possible.
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
![TMS-3000[S] 10-12 inch](https://danacnc.com/upload/pages/product/TMS3000(S)_1.png)
![TMS-3800[S] 15](https://danacnc.com/upload/pages/product/TMS3800(S)_1.png)
_1.png)
![TD-2500Y[BC]](https://danacnc.com/upload/pages/product/TD2500Y(BC)_1.png)
![TMS-2500[S]](https://danacnc.com/upload/pages/product/TMS2500(S)_1.png)
![TMS-2000[S]](https://danacnc.com/upload/pages/product/TMS2000(S)_1.png)
_1.png)
