1. Dual spindle design complemented with 2 Y-axis and 3 power turrets.
2. Workpieces can complete milling, tapping or even composite procedures such as eccentric turning in one jig fixture.
3. By functioning with automatic bar feeder or robotic arm, automatic processing can be realized.
4. Three tool turrets can perform multi-processing, effectively shortening the cutting time required.
| Specification | |
| Item | TMT2000-T2Y2 |
| Chuck O.D. | 8" inch |
| Bar capacity | Ø65 (Ø51) mm |
| X1/X2/X3 axis travel | 230/-/230 mm |
| Y1/Y2/Y3 axis travel | ±51/-/±51 mm |
| Z1/Z2/Z3/B axis travel | 440/-/440/680 mm |
| X/Y/Z/B axis rapid traverse | 30/15/36/30 m/min |
| Spindle nose | A2-6 |
| Spindle speed | 4,500 (6,000) rpm |
| Spindle motor | 18.5/15/11 kW |
| Sub-spindle chuck O.D. | 8" mm |
| Sub-spindle speed | 6,000 rpm |
| Sub-spindle motor | 18.5/11 kW |
| Tool capacity | 12 (16) x2 pc |
We Welcome all inquire regarding Sales, Service and Spare part.
Our representative will get back to you as soon as possible.
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
![TMS-3000[S] 10-12 inch](https://danacnc.com/upload/pages/product/TMS3000(S)_1.png)
![TMS-3800[S] 15](https://danacnc.com/upload/pages/product/TMS3800(S)_1.png)
_1.png)
![TD-2500Y[BC]](https://danacnc.com/upload/pages/product/TD2500Y(BC)_1.png)
![TMS-2500[S]](https://danacnc.com/upload/pages/product/TMS2500(S)_1.png)
![TMS-2000[S]](https://danacnc.com/upload/pages/product/TMS2000(S)_1.png)
_1.png)
