1. The column is fixed on the base, featuring high precision and high stability.
2. Designed for milling and boring for workpiece weight under 5 tons.
3. Highly rigid and efficient spindle head construction with speed reduction ratio up to 1:1 provides great torque output.
4. Choice of Ø110mm or Ø130mm spindle diameter.
5. Available to equip with twin stations pallet changer that maximizes investment efficiency.
6. An optional fully enclosed splash guard is available to avoid coolant leakage that meets environmental protection requirements.
| MODEL | UNIT | UBM-11016IS | UBM-11016RS | UBM-11016ISA | UBM-11016RSA | UBM-11016ISB | UBM-11016RSB | UBM-11016ISBA | UBM-11016RSBA | |
| TABLE | Table Size | mm | 1100x1250x1? | 1100x1250x0.001° | 1100x1250x1? | 1100x1250x0.001° | 1250x1500x1? | 1250x1500x0.001° | 1250x1500x1? | 1250x1500x0.001° |
| APC | APC | APC | APC | |||||||
| T-Slots | mm | 22x5 | 22X7 | |||||||
| Maximum Load | kg | 4000 | 3000 | 4000 | 3000 | 5000 | ||||
| (rotating simultaneously 1500) | (rotating simultaneously 1500) | |||||||||
| TRAVEL | X Axis | mm | 1600 | 1500 | ||||||
| Y Axis | mm | 0-1500(1800) | 0-1300(1600) | 0-1500(1800) | 0-1300(1600) | |||||
| Z Axis | mm | 1200 | 1100 | |||||||
| W Axis | mm | 400(500) | ||||||||
| SPINDLE | Diameter | mm | Ø 110 | |||||||
| Speed | rpm | 10~2500(3000) | ||||||||
| Taper | ? | 7/24 taper, ISO.50, BT-50 | ||||||||
| DISTANCES | Spindle Center to Table | mm | 0~1500(1800) | 0~1300(1600) | 0~1500(1800) | 0~1300(1600) | ||||
| Spindle Nose to Table Center | mm | 0~1600(-100~1600) | 90~1690(-10~1690) | |||||||
| Height from ground to table surface | mm | 1250 | 1450 | 1350 | 1550 | |||||
| FEED RATE | Rapid Feed rate X/Y/Z | m/min | 12 | |||||||
| Rapid Feed rate W | m/min | 10 | ||||||||
| Minimum Setting | mm/min | 0.001 | ||||||||
| Cutting Feed Rate | mm/min | 1~5000 | ||||||||
| MOTOR | Spindle Servo Motor | kW | 15/18.5(22/26) | |||||||
| Axis X / Y / Z / W / B | kW | 4/4/4/4/4 | ||||||||
| Lubricator Motor | kW | 0.15 | ||||||||
| Hydraulic Pump | kW | 3.7 | ||||||||
| Coolant Pump | kW | 1.62 | ||||||||
| Chip Conveyor | kW | 0.25 | ||||||||
| Oil Cooling Pump | kW | 3,6 | ||||||||
| ATC | No. of Tools | pieces | 32(40,60) | |||||||
| Tool Selection | ? | Absolute | ||||||||
| Tool Change Time | Sec. | 15 | ||||||||
| Max. Tool-Diameter/Length | mm | Ø 125/ Ø 250(Without Adjacent Tool)/Length 400 | ||||||||
| Max. Tool Weight | kg | 25 | ||||||||
| COOLANT & LUBRICATION | Coolant Tank Volume | L | 400 | |||||||
| Hydraulic Tank Volume | L | 80 | ||||||||
| Lubrication Tank Volume | L | 8 | ||||||||
| MISCELLANEOUS | Power Required | kVA | 45 | |||||||
| Pressurized Air | kg/cm² | 6 | ||||||||
We Welcome all inquire regarding Sales, Service and Spare part.
Our representative will get back to you as soon as possible.
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
![TMS-3000[S] 10-12 inch](https://danacnc.com/upload/pages/product/TMS3000(S)_1.png)
![TMS-3800[S] 15](https://danacnc.com/upload/pages/product/TMS3800(S)_1.png)
_1.png)
![TD-2500Y[BC]](https://danacnc.com/upload/pages/product/TD2500Y(BC)_1.png)
![TMS-2500[S]](https://danacnc.com/upload/pages/product/TMS2500(S)_1.png)
![TMS-2000[S]](https://danacnc.com/upload/pages/product/TMS2000(S)_1.png)
_1.png)
