1. Great machining capacity reaches 2500mm with Ø110mm spindle and 3500mm with Ø130mm spindle.
2. Choice of various loads (8 ~ 20 tons) of tables.
3. 1:12 teeth ratio for a spindle head with Ø110mm spindle and 1:22 teeth ratio with Ø130mm spindle provide demanding torque output.
| MODEL | UNIT | UBM-11016IS | UBM-11016RS | UBM-11016ISA | UBM-11016RSA | UBM-11016ISB | UBM-11016RSB | UBM-11016ISBA | UBM-11016RSBA | UBM-11020IS | UBM-11020RS | UBM-13020IS | UBM-13020RS | UBM-11020ISA | UBM-11020RSA | |
| TABLE | Table Size | mm | 1100x1250x1? | 1100x1250x0.001° | 1100x1250x1? | 1100x1250x0.001° | 1250x1500x1? | 1250x1500x0.001° | 1250x1500x1? | 1250x1500x0.001° | 1250x1250x360D | 1250x1250x0.001° | 1250x1250x360D | 1250x1250x0.001° | 1250x1250x360D APC | 1250x1250x0.001° APC |
| APC | APC | APC | APC | |||||||||||||
| T-Slots | mm | 22x5 | 22X7 | 22x7 | ||||||||||||
| Maximum Load | kg | 4000 | 3000 | 4000 | 3000 | 5000 | 5000 | 5000 | ||||||||
| (rotating simultaneously 1500) | (rotating simultaneously 1500) | |||||||||||||||
| TRAVEL | X Axis | mm | 1600 | 1500 | 2000 | 2000 | ||||||||||
| Y Axis | mm | 0-1500(1800) | 0-1300(1600) | 0-1500(1800) | 0-1300(1600) | 1800 | 1800 | 1650(2150) | 1650(2150) | 1800 | 1800 | |||||
| Z Axis | mm | 1200 | 1100 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | |||||||
| W Axis | mm | 400(500) | 400(500) | 400(500) | 700 | 700 | 400(500) | 400(500) | ||||||||
| SPINDLE | Diameter | mm | Ø 110 | Ø 110 | Ø 110 | Ø 130 | Ø 130 | Ø 110 | Ø 110 | |||||||
| Speed | rpm | 10~2500(3000) | 10~2500(3000)(4000) | 10~2500(3000)(4000) | 10~2000(2500,3000) | 10~2000(2500,3000) | 10~2500(3000)(4000) | 10~2500(3000)(4000) | ||||||||
| Taper | ? | 7/24 taper, ISO.50, BT-50 | 7/24 taper, ISO.50, BT-50 | |||||||||||||
| DISTANCES | Spindle Center to Table | mm | 0~1500(1800) | 0~1300(1600) | 0~1500(1800) | 0~1300(1600) | 0~1800 | 0~1800 | 0~1650(2150) | 0~1650(2150) | 0~1800 | 0~1800 | ||||
| Spindle Nose to Table Center | mm | 0~1600(-100~1600) | 90~1690(-10~1690) | 90~1890(-10~1890) | 90~1890(-10~1890) | -210~1890 | -210~1890 | 90~1890(-10~1890) | 90~1890(-10~1890) | |||||||
| Height from ground to table surface | mm | 1250 | 1450 | 1350 | 1550 | 1350 | 1350 | |||||||||
| FEED RATE | Rapid Feed rate X/Y/Z | m/min | 12 | 12 | 12 | 10/12/2012 | 10/12/2012 | 12 | 12 | |||||||
| Rapid Feed rate W | m/min | 10 | 10 | 10 | 6 | 6 | 10 | 10 | ||||||||
| Minimum Setting | mm/min | 0.001 | 0.001 | 0.001 | ||||||||||||
| Cutting Feed Rate | mm/min | 1~5000 | 1~5000 | 1~5000 | ||||||||||||
| MOTOR | Spindle Servo Motor | kW | 15/18.5(22/26) | 15/18.5(22/26) | 15/18.5(22/26) | |||||||||||
| Axis X / Y / Z / W / B | kW | 4/4/4/4/4 | 4/4/4/4/4 | 4/4/4/4/7 | 4/7/4/4/4 | 4/7/4/4/7 | 4/4/4/4/4 | 4/4/4/4/7 | ||||||||
| Lubricator Motor | kW | 0.15 | 0.15 | 0.15 | ||||||||||||
| Hydraulic Pump | kW | 3.7 | 2.25 | 2.25 | ||||||||||||
| Coolant Pump | kW | 1.62 | 1.17 | 1.17 | ||||||||||||
| Chip Conveyor | kW | 0.25 | 0.2 | 0.2 | ||||||||||||
| Oil Cooling Pump | kW | 3,6 | 0.75 | 0.75 | ||||||||||||
| ATC | No. of Tools | pieces | 32(40,60) | 40(60) | 40(60) | |||||||||||
| Tool Selection | ? | Absolute | Absolute | Absolute | ||||||||||||
| Tool Change Time | Sec. | 15 | 15 | 15 | ||||||||||||
| Max. Tool-Diameter/Length | mm | Ø 125/ Ø 250(Without Adjacent Tool)/Length 400 | Ø 125/ Ø 250(Without Adjacent Tool)/Length 400 | |||||||||||||
| Max. Tool Weight | kg | 25 | 25 | 25 | ||||||||||||
| COOLANT & LUBRICATION | Coolant Tank Volume | L | 400 | 400 | 400 | |||||||||||
| Hydraulic Tank Volume | L | 80 | 80 | 80 | ||||||||||||
| Lubrication Tank Volume | L | 8 | 8 | 8 | ||||||||||||
| MISCELLANEOUS | Power Required | kVA | 45 | 45 | 45 | 50 | 50 | 45 | 45 | |||||||
| Pressurized Air | kg/cm² | 6 | 6 | 6 | 6 | 6 | 6 | 6 | ||||||||
We Welcome all inquire regarding Sales, Service and Spare part.
Our representative will get back to you as soon as possible.
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
![TMS-3000[S] 10-12 inch](https://danacnc.com/upload/pages/product/TMS3000(S)_1.png)
![TMS-3800[S] 15](https://danacnc.com/upload/pages/product/TMS3800(S)_1.png)
_1.png)
![TD-2500Y[BC]](https://danacnc.com/upload/pages/product/TD2500Y(BC)_1.png)
![TMS-2500[S]](https://danacnc.com/upload/pages/product/TMS2500(S)_1.png)
![TMS-2000[S]](https://danacnc.com/upload/pages/product/TMS2000(S)_1.png)
_1.png)
