1. Moving column structure. X axis and Z axis are independent and their accuracy can be adjusted individually.
2. Upon customer request, a selection of various loads (8 ~ 20 tons) of tables are available.
3. Highly rigid column combined with mechanical counter-balance weight on Y axis provide higher stability and accuracy.
4. Friendly working space prevents coolant and chips from splashing to the operator even with a high pressure coolant through spindle.
5. Choice of Ø110mm and Ø130mm of spindle diameter.
| MODEL | UNIT | UBM-11016IS | UBM-11016RS | UBM-11016ISA | UBM-11016RSA | UBM-11016ISB | UBM-11016RSB | UBM-11016ISBA | UBM-11016RSBA | |
| TABLE | Table Size | mm | 1100x1250x1? | 1100x1250x0.001° | 1100x1250x1? | 1100x1250x0.001° | 1250x1500x1? | 1250x1500x0.001° | 1250x1500x1? | 1250x1500x0.001° |
| APC | APC | APC | APC | |||||||
| T-Slots | mm | 22x5 | 22X7 | |||||||
| Maximum Load | kg | 4000 | 3000 | 4000 | 3000 | 5000 | ||||
| (rotating simultaneously 1500) | (rotating simultaneously 1500) | |||||||||
| TRAVEL | X Axis | mm | 1600 | 1500 | ||||||
| Y Axis | mm | 0-1500(1800) | 0-1300(1600) | 0-1500(1800) | 0-1300(1600) | |||||
| Z Axis | mm | 1200 | 1100 | |||||||
| W Axis | mm | 400(500) | ||||||||
| SPINDLE | Diameter | mm | Ø 110 | |||||||
| Speed | rpm | 10~2500(3000) | ||||||||
| Taper | ? | 7/24 taper, ISO.50, BT-50 | ||||||||
| DISTANCES | Spindle Center to Table | mm | 0~1500(1800) | 0~1300(1600) | 0~1500(1800) | 0~1300(1600) | ||||
| Spindle Nose to Table Center | mm | 0~1600(-100~1600) | 90~1690(-10~1690) | |||||||
| Height from ground to table surface | mm | 1250 | 1450 | 1350 | 1550 | |||||
| FEED RATE | Rapid Feed rate X/Y/Z | m/min | 12 | |||||||
| Rapid Feed rate W | m/min | 10 | ||||||||
| Minimum Setting | mm/min | 0.001 | ||||||||
| Cutting Feed Rate | mm/min | 1~5000 | ||||||||
| MOTOR | Spindle Servo Motor | kW | 15/18.5(22/26) | |||||||
| Axis X / Y / Z / W / B | kW | 4/4/4/4/4 | ||||||||
| Lubricator Motor | kW | 0.15 | ||||||||
| Hydraulic Pump | kW | 3.7 | ||||||||
| Coolant Pump | kW | 1.62 | ||||||||
| Chip Conveyor | kW | 0.25 | ||||||||
| Oil Cooling Pump | kW | 3,6 | ||||||||
| ATC | No. of Tools | pieces | 32(40,60) | |||||||
| Tool Selection | ? | Absolute | ||||||||
| Tool Change Time | Sec. | 15 | ||||||||
| Max. Tool-Diameter/Length | mm | Ø 125/ Ø 250(Without Adjacent Tool)/Length 400 | ||||||||
| Max. Tool Weight | kg | 25 | ||||||||
| COOLANT & LUBRICATION | Coolant Tank Volume | L | 400 | |||||||
| Hydraulic Tank Volume | L | 80 | ||||||||
| Lubrication Tank Volume | L | 8 | ||||||||
| MISCELLANEOUS | Power Required | kVA | 45 | |||||||
| Pressurized Air | kg/cm² | 6 | ||||||||
We Welcome all inquire regarding Sales, Service and Spare part.
Our representative will get back to you as soon as possible.
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
![TMS-3000[S] 10-12 inch](https://danacnc.com/upload/pages/product/TMS3000(S)_1.png)
![TMS-3800[S] 15](https://danacnc.com/upload/pages/product/TMS3800(S)_1.png)
_1.png)
![TD-2500Y[BC]](https://danacnc.com/upload/pages/product/TD2500Y(BC)_1.png)
![TMS-2500[S]](https://danacnc.com/upload/pages/product/TMS2500(S)_1.png)
![TMS-2000[S]](https://danacnc.com/upload/pages/product/TMS2000(S)_1.png)
_1.png)
