UDM Large

Feature

1. The series of machines is designed for machining on extra large, wide and heavy workpieces. In case the table width is over 2500mm, the base width (X-axis) will be increased and mounted with three linear ways to evenly support the workpiece weight.

2. During machine design stage, extra large workpiece (height 1000 ~ 1500mm) machining was taken into consideration.

3. For large parts machining, dependable accuracy, durability and stability are all ensured.

4. Integrated linear guide way and linear scale is available to achieve higher accuracy especially for large parts machining.

5. Various optional milling heads (manual, semi-auto and automatic type) are available to meet cutomers' specific machining requirements.

Specifications

MODEL		UNIT	UDM-2216	UDM-2616	UDM-3216	UDM-4216	UDM-2221	UDM-2621	UDM-3221	UDM-4221	UDM-5221	UDM-3226	UDM-3228	UDM-4226	UDM-4228	UDM-5226	UDM-5228	UDM-6221	UDM-6226	UDM-6228
TABLE	Table Size	mm	2000x1400	2400x1400	3000x1400	4000x1400	2000x1800	2400x1800	3000x1800	4000x1800	5000x1800	3000x2200	3000x2500	4000x2200	4000x2500	5000x2200	5000x2500	6000x1800	6000x2200	6000x2500
	T-Slots	mm	22							22
	Maximum Load	kg	6	8	9	10	8	9	10	12	15	12	16	14	16	18	20	20	18	24
TRAVEL	X Axis	mm	2200	2600	3200	4200	2200	2600	3200	4200	5200	3200	4200	4200	4200	5200	5200	6200	6200	6200
	X Axis	mm	1600				2100			2100		2600	3200	2600	3200	2600	3200	2100	2600	3200
	Z Axis	mm	800(1000,1200)							800(1000, 1200)
SPINDLE	Spindle Servo Motor-cont./ 30min.	kW	15/18.5 (22/26)							15/18.5 (22/26)
	Speed	rpm	4000(6000)							4000(6000)
	Taper	?	7/24 taper NO.50, BT-50							7/24 taper NO.50, BT-50
DISTANCES	Between Two Columns	mm	1600				2100			2100		2600	2800	2600	2800	2600	2800	2100	2600	2800
DISTANCES	Spindle Nose to Table Center	mm	200~1000(200~1200, 200~1400)							200~1000(200~1200, 200~1400)
FEED RATE	Rapid Feed rate X/Y/Z	m/min.	12/10/2012							12/10/2012						12/10/2010
	Minimum Setting	mm/min.	0.001							0.001
	Cutting Feed rate	m/min.	1~5000							1~5000
ATC	No. of Tools	pieces	(24/32/40/60)							(24/32/40/60)
	Tool Change Time	sec.	8(ARM TYPE)							8(ARM TYPE)
	Max. Tool-Diameter/Length	mm	Ø125/Ø200(Without Adjacent Tool) / Length 350							Ø125/Ø200(Without Adjacent Tool)/ Length 350
	Max. Tool Weight	kg	18							18
COOLANT & LUBRICATION	Coolant Tank Volume	L	450				640	450	640	640			700	680	700	750	700	750		700
	Hydraulic Tank Volume	L	70				80	70	80	80
	Lubrication Tank Volume	L	8							8
MISCELLANEOUS	Power Required	kVA	50							50
	Pressurized Air	kg/cm²	7							7
	Hydraulics Required	kg/cm²	70							70
	Machine Weight	kg	26	28	30	33	27	29	31	35	38.5	38.5	43	43	44	49	51	44	50	53
	Controller	?	FANUC 0iMF (FANUC 32i-B/ 31i-B / MELDAS M70/720/730)(SIEMENS / HEIDENHAIN)							FANUC 0iMF (FANUC 32i-B/ 31i-B / MELDAS M70/720/730)(SIEMENS / HEIDENHAIN)