The PSS-TL hydraulic workshop press is designed for a wide range of mechanical operations, including sheet metal straightening, metal deformation, and assembly or disassembly of mechanical components.
The PSS-TL features a strong monolithic steel frame designed to withstand high pressures. Its wide front opening makes it easy to position long and wide workpieces, while the hollow work surface allows operations at different working heights.
The PSS-TL is equipped with a single-speed hydraulic power unit with a cylinder speed of under 6 mm/sec.
This configuration is ideal for workshops with occasional press usage that do not require high cylinder approach speeds or separate working speeds.
An optional transverse cylinder system allows the cylinder to be positioned precisely over the workpiece without moving the material.
The work platform is lifted using chains connected to the hydraulic cylinder and securely locked with steel tubes, preventing unwanted movement during operation.
.jpg)
As a safety measure to guarantee the operator's safety and to safeguard the machine, a maximum pressure valve is installed inside the hydraulic control unit on all hydraulic presses produced by SICMI.
The tubes for the passage of the electrical cables are anchored to the press frame by means of special collars.
Unlike many competitors who use simple plastic ties that are destined to dry out and break quickly, these collars are made of highly resistant material and are screwed to the structure of the press.
_800x533.jpg)
.jpg)
As a safety measure, the hydraulic hoses of all the presses produced by SICMI are firmly fixed to the machine frame using special collars which prevent any movement of the hydraulic hose.
These collars have the base welded to the frame, while the upper part is screwed.
All SICMI hydraulic presses are equipped with the Stopflex hose retention system, designed to secure pressurized hydraulic hoses and prevent uncontrolled movement in the event of fitting failure.
The system helps reduce the risk of the whip effect, protects personnel and equipment, and limits hydraulic oil release into the working area.
_800x533.jpg)
The mobile cylinder with handle allows the cylinder to be positioned directly over the workpiece, providing greater flexibility during pressing operations.
These metal blocks are positioned at the bottom end of the press and are completely welded to the machine structure.
Their function is to protect the operator's feet from any accidental fall of the work table.
| Specification | PSS 20 TI | PSS 40 TI | PSS 70 TI | PSS 70M TI | PSS 100 TI | PSS 100M TI | PSS 100MC TL | PSS 150 TI | PSS 150M TI |
|---|---|---|---|---|---|---|---|---|---|
| Tonnage | 20 | 40 | 70 | 70 | 100 | 100 | 100 | 150 | 150 |
| A | 1800 | 2050 | 2100 | 2100 | 2250 | 2250 | 2250 | 2450 | 2450 |
| B | 1200 | 1600 | 1700 | 1700 | 1900 | 1950 | 2400 | 1900 | 2400 |
| C | 500 | 700 | 700 | 700 | 1000 | 1000 | 1000 | 1200 | 1200 |
| D | 520 | 900 | 900 | 900 | 1050 | 1050 | 1500 | 1000 | 1500 |
| E | 145 | 210 | 240 | 240 | 300 | 300 | 300 | 430 | 430 |
| F | 825 | 900 | 900 | 900 | 900 | 900 | 900 | 850 | 980 |
| X | FIXED | FIXED | FIXED | 550 | FIXED | 600 | 1150 | FIXED | 1150 |
| Stroke | 350 | 350 | 350 | 350 | 350 | 350 | 350 | 350 | 350 |
| Working Speed (mm/sec) | 6 | 4 | 4 | 4 | 3 | 3 | 3 | 3 | 3 |
| Power (kW) | 1.5 | 1.5 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Weight (kg) | 180 | 420 | 710 | 710 | 1030 | 1030 | 1300 | 1800 | 2450 |
We Welcome all inquire regarding Sales, Service and Spare part. Our representative will get back to you as soon as possible.
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
+966 564170057